Microbe Lift Nite Out II is designed specifically for koi ponds. It's highly-specialized microbial consortium of nitrifying cultures are specially formulated to eliminate ammonia via a natural biological process termed nitrification.  

The cultures contained in Microbe Lift Nite Out II will establish, promote or stabilize and maintain nitrification in pond waters, eliminating the toxic effect of ammonia.

Microbe Lift Nite-Out II liquid nitrifying bacteria contains select strains of Nitrosomonas, Nitrospira and Nitrobacter.  Nitrosomonas convert ammonia to nitrite and Nitrobacter and Nitrospira convert nitrite to nitrate.

Microbe Lift Nite-Out II comprises select microorganisms that are autotrophic-able to use carbon dioxide as the sole source of carbon-and are relatively slow growing, requiring specific conditions for optimum growth with typical cell division rates from 8 to 16 hours. Their performance and rate of growth are impacted by the environmental parameters required for nitrification.

Notes on Nitrification:

When ammonia removal is desired first use Microbe Lift Clean & Clear to treduce the organic waste in the pond as high leves of BOD  can inhibit the nitrification pocess by competing with the nitrifying microorgansisms for the necessary oxygen that is available. Aftyer applying Microbe Lift Clean & Clear wait for approximately 24 - 48 hours for the Clean & Clear to do it's job then apply Microbe Lift Nite Out II.

Prior to the additin of Nite Out II (to start the nitrification process), check to make sure that the pond's pH isin the correct range for the nitrification process. Adjust the ponds pH range to 7.5 to 8.7 and check to see if adequate alkalinity is present as you must maintain a level of at least 50 ppm of alkalinity at all times. This is necessary as the nitrifying microorganisms use 7.1lbs of alkalinity for weach pound of ammonia removed (oxidized).

If the correct level of alkalinity is not present, nitrification will not occur, and if alkalinity is lost then the nitrification process will cease and the pond's pH will drop due to the nitrifying cultures activity. To increase the alkalinity add the Kusuri Bio Blanace until you achieve an alkalinity level of 50ppm to 100ppm minimum. and then maintain the alkalinity at 50ppm.

Microbe Lift Nite Out II is designed specifically for koi ponds. It's highly-specialized microbial consortium of nitrifying cultures are specially formulated to eliminate ammonia via a natural biological process termed nitrification.  

The cultures contained in Microbe Lift Nite Out II will establish, promote or stabilize and maintain nitrification in pond waters, eliminating the toxic effect of ammonia.

Microbe Lift Nite-Out II liquid nitrifying bacteria contains select strains of Nitrosomonas, Nitrospira and Nitrobacter.  Nitrosomonas convert ammonia to nitrite and Nitrobacter and Nitrospira convert nitrite to nitrate.

Microbe Lift Nite-Out II comprises select microorganisms that are autotrophic-able to use carbon dioxide as the sole source of carbon-and are relatively slow growing, requiring specific conditions for optimum growth with typical cell division rates from 8 to 16 hours. Their performance and rate of growth are impacted by the environmental parameters required for nitrification.

Notes on Nitrification:

When ammonia removal is desired first use Microbe Lift Clean & Clear to treduce the organic waste in the pond as high leves of BOD  can inhibit the nitrification pocess by competing with the nitrifying microorgansisms for the necessary oxygen that is available. Aftyer applying Microbe Lift Clean & Clear wait for approximately 24 - 48 hours for the Clean & Clear to do it's job then apply Microbe Lift Nite Out II.

Prior to the additin of Nite Out II (to start the nitrification process), check to make sure that the pond's pH isin the correct range for the nitrification process. Adjust the ponds pH range to 7.5 to 8.7 and check to see if adequate alkalinity is present as you must maintain a level of at least 50 ppm of alkalinity at all times. This is necessary as the nitrifying microorganisms use 7.1lbs of alkalinity for weach pound of ammonia removed (oxidized).

If the correct level of alkalinity is not present, nitrification will not occur, and if alkalinity is lost then the nitrification process will cease and the pond's pH will drop due to the nitrifying cultures activity. To increase the alkalinity add the Kusuri Bio Blanace until you achieve an alkalinity level of 50ppm to 100ppm minimum. and then maintain the alkalinity at 50ppm.