Reducing Bush (Metric)

These are the reducers required to reduce the fittings sizes Metric (European sized pipework to Imperial Pressure or Black Solvent Weld or Black Solvent Waste Pipe.

These reducing sleeves will reduce the internal diameter of all Europeran sized Metric internal diameter such as Bead Filter, Sieves, 3 way Valves other fittings that have a Metric internal diameter to reduce this size to accomodate Class E imperial Pressure Pipe, Black Solvent Weld or Black Solvent Waste Pipe.

Reducing Bush (Metric) Sizes Available:

• 63 mm Reducing Bush to 2 Inch (50mm) Black Solvent Weld.
• 63 mm Reducing Bush to 2 Inch  Imperial Pressure.
• 50 mm Reducing Bush to 1-1/2 Inch (40 mm ) Black Solvent Weld.
• 50 mm Reducing Bush to 1-1/2 Inch Imperial Pressure.

If unsure about any of the fittings or reducers required please don't hesitate to contact us, we are here to help.

If your requirements are to reduce Imperial Pressure fitting sizes to Imperial pressure, i.e. 2 Inch to 1-1/2 Inch  then you will require the Pressure Reducers to do this.  If your need is to reduce Class E Pressure sizes to Black Solvent Weld sizes then you will require the Reducing Sleeves (pressure to waste) in order to do this.

Reducing Bush (Metric)

These are the reducers required to reduce the fittings sizes Metric (European sized pipework to Imperial Pressure or Black Solvent Weld or Black Solvent Waste Pipe.

These reducing sleeves will reduce the internal diameter of all Europeran sized Metric internal diameter such as Bead Filter, Sieves, 3 way Valves other fittings that have a Metric internal diameter to reduce this size to accomodate Class E imperial Pressure Pipe, Black Solvent Weld or Black Solvent Waste Pipe.

Reducing Bush (Metric) Sizes Available:

• 63 mm Reducing Bush to 2 Inch (50mm) Black Solvent Weld.
• 63 mm Reducing Bush to 2 Inch  Imperial Pressure.
• 50 mm Reducing Bush to 1-1/2 Inch (40 mm ) Black Solvent Weld.
• 50 mm Reducing Bush to 1-1/2 Inch Imperial Pressure.

If unsure about any of the fittings or reducers required please don't hesitate to contact us, we are here to help.

If your requirements are to reduce Imperial Pressure fitting sizes to Imperial pressure, i.e. 2 Inch to 1-1/2 Inch  then you will require the Pressure Reducers to do this.  If your need is to reduce Class E Pressure sizes to Black Solvent Weld sizes then you will require the Reducing Sleeves (pressure to waste) in order to do this.