Reducing Sleeves, Reducing Bushes and Pressure Reducers.

Here you will find every Reducer Sleeve, Reducing Bush, and Pressure Reducers that you should ever require to enable a smooth fitting of all your pipework, fittings, Ball valves, Bead filters, Seives etc.

There are basically three types of reducers listed here in multiple sizes to accommodate all your requirements.

Pressure Reducers

Pressure reducers are used to reduce the size of imperial pressure fittings to accomodate different sizes of Imperial Pressure pipe. An example of this is to reduce 2 Inch imperial pressure to 1-1/2 Inch Imperial Pressure.

Reducing Sleeves (Pressure to Waste)

These Reduicng Sleeves (Pressure to waste) are used to reduce the size of imperial pressure fittings to enable them to be used with Black Solvent Weld or Black Solvent Waste pipe. An example of this is if you wish to use the Valterra Slides with Black Solvent Weld or Black Solvent Waste pipe then you would use two of these reducers and  glue them into each of the connections of the Valterra Slide Valves.

Reducing Bush (Metric)

These reducing Bushes are used to reduce 63 mm and 50 mm pipe fittings or connections, which are common in Europe. These reducing Bush (Metric) will reduce these sizes to either Imperial Pressure or Black Solvent weld pipe sizes, which are a lot more common in the UK. These enable fast conversion of these European sizes to enable the vast amount of pressure fittings and black solvent Weld fittings readily available here.